VIPowER VP-8059L - Manual (Page 5)

FireWire 1394dock Installation Manual 3
2-1 Installation
Refer to the following for setup of the FireWire 1394dock for operation.
• For Mac ® user’s: A software driver is required for operation of the FireWire
1394dock with Mac computers. This must be purchased separately.
• For use with the Mobile Rack: please refer to the Mobile Rack Installation
manual for instructions for installing devices in the Mobile Rack drive case.
2-1.1 Install Stand Set on Mobile Rack (Model VP-8059)
A 4-piece stand set is included to help heat dissipation and provide secure placement
of the Mobile Rack. After mounting the device in the Mobile Rack, slide a stand pad
onto each corner .
FireWire 1394dock Docking Kit Components (with Mobile Rack)
FireWire
1394 Cable
Power Adapter
Power Cord
+5V/+12V
Power Adapter
FireWire
1394dock
Mobile Rack
Stand Set
Mobile Rack Stand Set Installed
Stand Pad
(With Raised Nub
on Bottom)
(x4)
Mobile Rack
Docking Case
Mobile Rack
Drive Case