VIEWSONIC VS12602 - Manual (Page 6)

ViewSonic VPC101 v
Copyright Information
Copyright © ViewSonic ® Corporation, 2009. All rights reserved.
Microsoft ® , Windows ® , Windows NT ® , and the Windows ® logo are registered
trademarks of Microsoft ® Corporation in the United States and other countries.
ViewSonic ® , the three birds logo, OnView, ViewMatch, and ViewMeter are registered
trademarks of ViewSonic ® Corporation.
Intel ® , Pentium ® , and Atom™ are registered trademarks of Intel Corporation.
AMD ® , Athlon™, Athlon™ XP, Thoroughbred™ and Duron™ are registered
trademarks of AMD ® Corporation.
NVIDIA ® , the NVIDIA logo, DualNet and nForce are registered trademarks or
trademarks of NVIDIA Corporation in the United States and/ or other countries.
PS/2
® and OS/2 ® are registered trademarks of International Business Machines
Corporation.
Netware
® is a registered trademark of Novell, Inc.
Award ® is a registered trademark of Phoenix Technologies Ltd.
AMI ® is a registered trademark of American Megatrends Inc.
Disclaimer: ViewSonic ® Corporation shall not be liable for technical or editorial errors
or omissions contained herein; nor for incidental or consequential damages resulting
from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic
® Corporation reserves
the right to change product specifications without notice. Information in this document
may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for
any purpose without prior written permission from ViewSonic
® Corporation.
U.S. Patent Numbers
4,631,603; 4,819,098; 4,907,093; 5,315,448; and 6,516,132.
This product incorporates copyright protection technology that is protected by U.S.
patents and other intellectual property rights. Use of this copyright protection
technology must be authorized by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.