VBrick Systems ETHERNETV 4410-0118-0009 - Manual (Page 198)

186 © 2009 VBrick Systems, Inc.
b. Publishing Point Name
c. Publishing Point User Name
d. Publishing Point Password
e. Publishing Point Viewing URL
f.
Hosted Page Viewing URL
The information labelled a–c above is entered on the VBrick appliance Push configuration
page. When the event is initiated (via the Scheduler), the Portal Server turns on the Push
transmit and streams to the remote publishing point. Internal authenticated users are directed
to view the multicast/unicast directly from the VBrick encoder appliance. You can only
initiate the push via a Portal Server "schedule" that turns on a local multicast or unicast
server. External viewers are directed to the publishing point of the service provider. If the
event presenter wishes to provide event access to non-authenticated viewers via an e-mail, he
would e-mail the interested viewers the hosted page viewing URL (f). This mode does not
require access to the Portal Server and the video will be launched using a Windows Media
Player.
Portal Server Hosting
VBrick Configuration
VBrick Push Configuration
Regardless of whether you are serving remote Portal Server clients or non-Portal Server
Internet web page viewers, the VBrick must be configured to push the stream to the provided
destination hosting URL. The information in a–c should be entered in the appropriate fields
as shown below. See the WM Appliance Admin Guide for more information.
Figure 23. VBrick Push Configuration Page