Vivitar 3615 - Manual (Page 27)

15
800x600 ★★ 8:1 64
800x600 ★ 16:1 129
Using the Flash
The Flash mode can only be set under Record mode . There are 4 modes available:
Auto, Red-Eye Reduction, Forced Flash and Off. The default setting is Auto. To
change the setting, press the Flash button a number of times until the desired one is
selected.
Mode Description
Auto Flash is enabled automatically in low light conditions
Red-Eye Reduction Auto mode with pre-flash to reduce red eye effect
Forced Flash Flash is always enabled
Off Flash is always disabled