Talk pro, Technical specifications, The power of voice – VXI TALKPRO MAX User Manual

Page 2: Talkpro sp1/ sp2, Ct switch

Advertising
background image

VXI Corporation

One Front Street

Rollinsford, NH 03869

www.vxicorp.com

800-742-8588

603-742-2888

Technical Specifications

Talk

Pro

TM

The Power of Voice

.

TALKPRO SP1/ SP2

MICROPHONE SPECIFICATIONS

Microphone: Gentex noise canceling
Ambient noise suppression: 13dB @ 1 kHz, typical
Output impedance: 1.8 kOhms typical
Sensitivity: -54dB @ 1kHz (defined 1" from talk-side, 82dB SPL)
Signal to noise ratio: More than 50dB
Frequency response: 100Hz to 6.3 kHz
Operating current: 300uA max
Operating voltage: 1.0 V DC min. to 20 V DC max.

RECEIVE SPECIFICATIONS

Speaker: Dynamic, 36mm diameter
SPL: 99 + 3dB (MEAN VALUE @ 0.8, 1.0, 1.2, 1.5 KHz)
Impedance: 300 Ohms
Frequency Response: 190 To 5.2 KHz
Rated Input Power: 40 mW continuous, 100 mW maximum

MECHANICAL SPECIFICATIONS

Cables: Stranded wire, PVC insulation, polyurethane jacket
Connectors: Gold plated; quick disconnect
Microphone Boom: Flexible gooseneck / Swivels 270 degrees for left or right ear placement
Headband: Stainless steel adjustable band; Ratchet positioning
Weight (without cord): Monaural - 1.5 oz / Binaural - 2 oz
Cord: Terminates in a quick disconnect connector
Cord

length: 2' 1"

CT SWITCH

TELEPHONE TRANSMIT PATH FROM HEADSET

Output Network: AC coupled, transformer isolated, self-configuring for electret, dynamic, or
carbon type telephone.
Output Level: Auto-setting for telephone type with manual fine adjustment
Transmit Adjustment: -10dB max to -3 dB min.
Mic Sensitivity: -53dB at 82 dB SPL at 25mm

TELEPHONE RECEIVE PATH TO HEADSET

Input Impedance: 300 Ohms
Volume Control: +20dB max to -6dB min.
Output Level: 94 dBA at max. volume with headset supplied, 300 Ohm receive; AGC circuit
limited

OPERATING POWER

120 VAC adapter supplied providing 12 VDC, 100 mA output for USA and Canada. European
and UK adapters available.

MIC OUTPUT TO COMPUTER

Output Level: -50dB at 82 dB SPL at 25mm
Output Impedance: 2.2 k Ohms

SPEAKER INPUT FROM COMPUTER

Input Impedance: 500 Ohms, transformer isolated
Output Level to Headset: -4 dB rel. to output from computer
Acoustic Output: 105 dBA max

MECHANICAL SPECIFICATIONS

Plastic housing
Weight (without cords): 5.1oz
Cords: 18' modular cord to telephone. 10' modular coil cord. Quick disconnect compatible
with TalkPro SP or TuffSet style headsets. 7' 7" cord to computer with two 3.5mm (mic and
speaker) plugs.

TalkPro SP1

TalkPro SP2

Compatible with:

CT Switch

Passport V-series USB Cord

QD1030 Sound Card Cord

CT Switch

Compatible with:

TalkPro SP Headsets

Advertising
This manual is related to the following products: