VocoPro KJ-7000 Pro - Manual (Page 7)

7
KJ7000 Pro Features
New space saving rack design, just 6 spaces!
Loaded with 7 Input Channels: 4 Mic, 2 switchable AV/Phono and 1 switchable AV/Line.
Channel features include: Gain, Bass, Treble, Echo, Key Control and XLR or 1/4 “ jack
options.
3 Video Inputs/Outputs for multi-screen video options
Convenient On-board Video Switching making video syncing a snap!
Assignable 11-step Digital Key Controller (1/2 tone per step)
Professional Digital Echo with Repeat and Delay controls
On-board Vocal Cancel and Talkover with Automatic Mode
5-Band Graphic Equalizer for precise room tuning
Booth/Monitor Outputs, Balanced Master Outputs (XLR), Unbalanced Master Outputs
(RCA) and Record Outputs.
Independent Effect Send and Return for each Mic Channel
Assignable Crossfader
12V Light Jack for lamp connection
•
•
•
•
•
•
•
•
•
•
•
•
•
Mounting
To mount, carefully place the KJ-7000 Pro in the rack space of your case. The KJ-7000 Pro takes 4 screws to
mount. Make sure holes are aligned evenly. Use an alternating “X” rotation when screwing to ensure even
tension and alignment.
(See diagram below)
You will need:
• 19" Rack Case
• 4 Mount Screws
• Phillips-head Screwdriver
Note:
When top mounting, make sure
you have at least 2 rack-spaces
available.
1
2
4
3