Vizio E321MV User Manual
32” class razor led, Lcd hdtv
Advertising
Table of contents
Document Outline
- Table of Contents
- Installing the TV
- Controls and Connections
- Connecting Your Devices
- Completing the First-Time Setup
- Adjusting the TV Settings
- Using the Other Menu Settings
- Navigating the On-Screen Menu
- Setting the Sleep Timer
- Viewing a USB Photo Slideshow
- Setting the Screen Aspect Ratio
- Adjusting the Audio Settings
- Adjusting the Picture Settings
- Enabling or Disabling the Ambient Light Sensor
- Changing the Picture Mode
- Adjusting the Noise Reduction Setting
- Adjusting the Color Temperature
- Enabling or Disabling Color Enhancement
- Enabling or Disabling Adaptive Luma
- Enabling or Disabling DCR (Dynamic Contrast Ratio)
- Resetting the Picture Settings
- Using the Parental Controls
- Viewing System Info and Resetting to Factory Defaults
- Setting Up Closed Captioning
- Troubleshooting & Technical Support
- The TV displays “No Signal.”
- There is no power.
- The power is on, but there is no image on the screen.
- There is no sound.
- The colors on the TV don’t look right.
- The buttons on the remote aren’t working.
- The image quality is not good.
- The picture is distorted.
- The display image does not cover the entire screen.
- The TV has pixels (dots) that are always dark or always lit.
- I see “noise” or static on the screen.
- When I change input source, the volume changes.
- When I change input source, the display image changes size.
- The TV displays “No Signal.”
- Specifications
- Limited Warranty
- Legal & Compliance