Vincent Audio CD-S6MK - Manual (Page 8)

6. CANCEL Button
In the stop mode, this button is used to cancel tunes which have been programmed.
7. PGM (Program) Button
Press this button in the stop mode, to activate the programming operation. When
this button is pressed, the " PGM " indicator lights in the display of the unit. To
release the programming mode, press this button again.
8. RANDOM Button
When this button is pressed , the player enters random play mode ( tracks in the disc
are selected and played in a random order ). When pressed it again, random play
is canclled.
9. VOL Button
Press to adjust the ANALOG OUTPUT volume between 0 and 26 level.
10. SEARCH Buttons ( / )
When one of these buttons was pressed during play or in the pause mode, the
pickup is moved quickly in the forward or reverse direction while slightly muted
sound is output(audible cueing).
Use the button to move the pickup in the forward direction, and the button to move
it in the reverse direction.
1. To loose screw in the back of remote control, then open the cover.
2. Insert two AA ( R6 or UM-3 ) batteries into the battery compartment. Carefully follow the
polarity diagram ( positive (+) and negative (-) symbols ) inside the battery compartment.
3. Replace the cover, put screw in .
Installing the remote controller batteries
2 1 3
Function introduction
7