VocoPro Carry-Oke Microphone - Manual (Page 15)

15
Getting Connected cont.
Removing the AVP Cable
To remove the AVP Cable, you must simultaneously
pull back the notched cap and pull the cable in an
outward motion.
Battery Installation
• Three AA batteries (Not Included) can be used to
power the unit instead of AC Power.
Unscrew the microphone battery compartment
cover and insert three AA batteries. Be sure to
observe proper battery polarity (+/-). Tighten the
battery compartment lid.
(NOTE: The CARRY-OKE system does not charge batteries)
�� �� ��
��
���
You can only remove the AVP Cable
by holding here (notched cap) with
your fingers.