Vantec NST-360FBSU-BK - Manual (Page 12)

Installation
10
NOTE :
Because some motherboard does not support
eSATA hot-plug and play function, if you meet this
situation, please follow below steps to setup NexStar 3.
1. Shut down your computer.
2. Turn on NextStar 3 then connect it to your computer.
3. Power on your computer.
5.5 FireWire 800/400(1394b/1394a) Mode
Use in Vista X86、Vista 64 bit、Windows XP、
Windows 2000 and MAC OS
No driver is required for Vista X86, Vista 64-bit,
Windows XP, Windows 2000 and Mac OS 10.2
or higher. NexStar 3 does not support Windows 98,
Windows ME and Mac OS 10.1 or older in
FireWire 800/400 mode.
5.4 eSATA Mode
Use in Vista X86、Vista 64 bit、Windows XP、
Windows 2000 and MAC OS
No driver is required for Vista X86, Vista 64-bit,
Windows XP, Windows 2000 and Mac OS 10.2
or higher. NexStar 3 does not support Windows 98,
Windows ME and Mac OS 10.1 or older in eSATA
mode.