Vivitar VIV-TEL-76700 - Manual (Page 9)

-8-
1. Eyepieces : Insert any of the eyepieces into the eyepiece joint tube and tighten the
locking screws. This will provide you with the optical power that you need.
2.The Sighting Scope : The sighting scope has a low magnification and wide visual field,
which can help you find far away objects quickly.
3. Erecting Eyepiece: Put the erecting eyepiece in the eyepiece joint tube, and tighten the
locking screw. The image you are viewing will be straighten out , but the image can be a bit
dim.
4. Moon Filter : Because there is a great deal of reflected glare when the full moon is
observed , the addition of the moon filter will remove this glare and make it possible to
sharpen surface details . At other times , this filter is unnecessary and a sharper image can
be obtained without it . The moon filter is screwed into the eyepiece in the same way that
the sun filter is added .
Using Your Telescope’s Accessories