Maintenance and security, Replacing the projection lamp, Rrectly. see replacing the projection lamp on pa – Vivitek D7 User Manual
Page 48: Eplacing the, Rojection, Aintenance and, Ecurity
DLP Projector – User’s Manual
– 40 –
M
AINTENANCE AND
S
ECURITY
Replacing the Projection Lamp
The projection lamp should be replaced when it burns out. It should only be replaced with a certified
replacement part, which you can order from your local dealer.
Important:
a. The projection lamp used in this product contains a small amount of mercury.
b. Do not dispose this product with general household waste.
c. Disposal of this product must be carried out in accordance with the regulations of your local
authority.
Warning:
Be sure to turn off and unplug the projector at least 30 minutes before replacing the lamp. Failure to
do so could result in a severe burn.
1.
Remove the single screw on
the lamp compartment cover.
2.
Remove the lamp compart-
ment cover.