VocoPro UHF-388 - Manual (Page 7)

5
• UHF band operation for less interference and cleaner vocals.
• Dual mic channels with individual volume controls.
• Bright LED display for monitoring RF signal levels.
• Built-in noise mute circuitry to eliminate “pops” when turning mics on & off.
• Dual on-board microphone chargers.
• Angle adjustable antennas ensure better signal reception.
• Front panel LED charge indicators for each microphone charger.
• Sturdy metal casing for on-the-road protection.
• Mounting brackets included for rack-case integration.
• Outputs: Individual Balanced XLR outputs and single ¼” mixed output.
Specifications and Features
Reciever:
Frequency Stability ±0.005%
S/N Ratio >100dB
RF Sensitivity 107dBM (12dB S/N AD)
Image Rejection >60dB
T.H.D. (1 KHz) >60dB
Display VFD
Controls Power ON/OFF, Volume controls
Audio Output Level 12dB
AF Output Impedence 2.2Ω Unbalanced
Operation Voltage 14-18V DC, 800mA
Output Connector 2 balanced XLR, 1 unbalanced ¼”
Transmitter (Microphone):
Carrier Frequency Range 600-900MHz
RF Output 10mW
Stability ±0.005%
Frequency Deviation ±48KHz
S/N Ratio >102dB
LED Display Power ON/OFF, Low Battery indicator
Controls Power ON/OFF
Audio Frequency Range 50Hz-16KHz
Battery Rechargeable AA 1.2V x 2
Features
Specifications