Velodyne Acoustics ADWANTAGE IA-400 - Manual (Page 4)

InstallAdvantage IA-400 Amp manual
w w w . c h r y s a l i s a c o u s t i c s . c o m
1
C
O N G R A T U L A T I O N S
Congratulations on your purchase of a Chrysalis™ InstallAdvantage Series (IA) amplifier and subwoofer. This system represents the
state-of-the-art in low frequency reproduction. Read and follow the instructions below to ensure safe and proper system operation.
Warning!
To prevent fire or shock hazard, do not expose this equipment to rain or moisture. To avoid electrical shock, do not open the speaker
enclosure or the amp chassis cover. Please observe all warnings on the equipment itself. There are no user serviceable parts inside.
Please refer all service questions to your authorized Chrysalis dealer.
P r i o r t o I n s t a l l a t i o n
Please unpack the system carefully. Please save the carton and all packaging materials for future use. Record the serial number in the
space provided on the warranty card, on page 19, for future reference.
I A - 4 0 0 S u b w o o f e r A m p l i f i e r
• 400 watts dynamic/200 watts RMS high efficiency, Class A/B
• DSP-controlled
• Four selectable presets for customized listening mode
• Automatic 5-band room equalizer (microphone included)
• Night-mode setting
• Mute control
• Line-level (RCA) inputs and outputs
• Speaker-level inputs with 5 way binding post connections
• Signal sensing auto turn on/off (defeatable)
• Variable volume control
• Selectable phase control (0, 90, 180 or 270 degrees)
• Built-in adjustable (30-160 Hz) digital low-pass crossover with 24 dB/octave slope
• Driver Displacement Control software to prevent over excursion and amp clipping
• Blue power indicator LED
• RS-232 Serial Interface
• 12 Volt trigger
• Universal IR repeater mini-jack
• Preset-specific subsonic filter
P
R O D U C T
F
E AT U R E S