Preparing your lcd hdtv for wall mounting – Vizio GV42L FHDTV10A User Manual
Page 6
VIZIO GV42L FHDTV10A User Manual
Version 10/9/2007
6
www.VIZIO.com
Preparing Your LCD HDTV for Wall Mounting
The VIZIO GV42L FHDTV10A can either be kept on the stand base or mounted on the wall for viewing. If
you choose to mount the GV42L FHDTV10A on the wall, please follow the instructions below for
removing the stand base.
To find the perfect mount for the VIZIO GV42L FHDTV10A, browse VIZIO’s certified mount selection at
IOCE (888-849-4623).
To remove the stand base
1. Unplug all of the cables and cords from your GV42L
FHDTV10A.
2. Place the GV42L FHDTV10A face down on a soft and
flat surface (blanket, foam, cloth, etc) to prevent any
damage to the TV.
3. Pull the stand cover off by squeezing the sides to
release the retaining plastic tabs.
4. Remove the four (4) screws
(screw’s specs: M4, 0.7 Pitch,
15mm long) so that the stand
base can be removed.
5. Gently remove the stand
base.
6. Now, the GV42L FHDTV10A can fit securely to a
mount (sold separately) by utilizing the mounting
holes in the center of the back panel of the TV.
Please make sure to read the instructions of your
specific mount to properly hang the GV42L
FHDTV10A.
The pitch of the mounting holes is 600mm horizontally
and 200mm vertically. The screws type required is
metric: M8, 1.25 Pitch, 25mm long.
To find the perfect mount for the VIZIO GV42L FHDTV10A, browse VIZIO’s certified mount selection at
or call directly 888-VIZIOCE (888-849-4623).