Venturer STB7766G1 - Manual (Page 19)

- 18 -
ON-SCREEN MENU - LOCK
1. Press the MENU button on the remote control.
2. Use the / buttons to select the LOCK menu.
3. Use the / buttons to select Set Password then
press the ENTER button or the button.
4. Enter values (4 digit) for new password and again to
confi rm password.
Set Password
RRT
1. Press the MENU button on the remote control.
2. Use the / buttons to select the LOCK menu.
3. Use the / buttons to select Block Channel then
press the ENTER button or the button.
4. Use the / buttons to select Antenna Channel then
press the ENTER button.
Block Channel
RRT
Notes:
• Remember your password if you have changed it.
• If you forget the password,enter “8888” to unlock parental control.
1. Press the MENU button on the remote control.
2. Use the / buttons to select the LOCK menu.
3. Use the button to position the cursor on the input fi eld and enter password. If you have not
specifi ed the password, input the factory-default code, “0000”.
4. Use the / buttons to select Lock System then press the ENTER button or the button.
5. Use the / buttons to select On/Off.
Lock System
RRT RRT
811-776691W032.indd 18 811-776691W032.indd 18 12/18/2008 9:55:59 AM 12/18/2008 9:55:59 AM