Vivitar Vivicam T135 - Manual (Page 31)

30
Format Memory Card Menu (3D and 2D Photo Capture)
You can use the Format Memory Card menu to delete all of the content that is currently on your
camera‟s memory card.
Keep in mind that formatting the memory card will permanently delete all of the content on
your camera ’s memory card.
This option will delete all of the content at one time. If you would like to delete individual images,
use the delete menu in the camera‟s Playback mode.
1) Press the SET button to open the menus for the current mode.
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Format Memory
Card menu.
3) Press the UP or DOWN direction control buttons to highlight the menu options.
4)
To exit without formatting the card, select „Cancel‟ and press the SET button.
5)
To proceed with the format, select “Yes” and press the SET button.
You will be asked to confirm the formatting of the memory card.
 Select “No” to exit without formatting.
 Select “Yes” and press the SET button to begin the format.
The memory card will be completely formatted.
Firmware (Factory Default Settings) Menu (3D and 2D Photo Capture)
Use this menu to view the Firmware version on your camera or to reset your camera settings to
the Factory Default Settings.
1) Press the SET button to open the menus for the current mode.
2) Press the LEFT or RIGHT direction control buttons to scroll and select the Firmware menu.
3)
The “Default Setting” is selected.
4) Press the SET button to reset the camera to the factory default settings.
5) You will be asked to confirm the resetting to the factory default settings.
 Select “No” to exit the menu and return to the previous mode without resetting to the
default settings.
 Select “Yes” and press the SET button to proceed with the reset.