VocoPro AUTOMATIC VOLUME CONTROL AVC-800 - Manual (Page 11)

10
Operations cont.
BYPASS
When the AVC-800 is in BYPASS mode, both AVC and the SONIC ENHANCER are inactive.
Setting BYPASS mode
INPUT LEVEL CONTROL
You can manually adjust the volume level of the input using the LEVEL ADJ control on the rear panel of the
AVC-800. Turn the LEVEL ADJ control clockwise to INCREASE the input volume level and turn it
counter-
clockwise to DECREASE the input volume level.
SELECTOR
LED
will light
AVC
SONIC ENHANCER
AVC+SONIC ENHANCER
BYPASS
POWER
To set the AVC-800 to BYPASS mode, push
the SELECTOR button until the BYPASS LED
is lit.
R L
AUDIO IN
MIN MAX
LEVEL ADJ
Decrease Volume
Increase Volume