Victorinox Night Vision II - Manual (Page 5)

3. Signal Mode Three quick pushes of the pusher
will cause the light to strobe for 2 minutes. To
deactivate, press pusher once.
4. Intense Signal Mode Holding the pusher for 5
seconds will activate an intensified LED strobe
that flashes continuously. Intense Signal Mode is
brighter than normal Signal Mode flashing. To
deactivate, press pusher for 5 seconds.
5. Locator Mode Red LED locator beacon is
positioned at the 6 o’clock marker and
blinks once every 10 seconds. An easy way
to find your timepiece.
6. Battery End of Life Mode Red LED locator
beacon positioned at the 6 o’clock marker will
flash 3 times every 10 seconds indicating
lighting batteries should be changed.
Pusher
2.