Verizon VZ4000 - Manual (Page 22)

20
Using the Wireless Networking Utility from Verizon Using the Wireless Networking Utility from Verizon
Configuring your Wireless G Desktop Card
to use Security
At this point, you should already have your wireless router set to use
WPA or WEP. In order for you to gain a wireless connection, you will
need to set your Wireless G Desktop Card to use the same security
settings.
Changing the Wireless Security Settings
The Wireless G Desktop Card supports the latest WPA security feature
as well as the legacy WEP security standard. By default, wireless
security is disabled.
To enable security, you will first need to determine which standard is
used by the router. (See your wireless router’s manual for directions on
how to access the security settings.)
To access the security settings on your Card, click the “My
Connections” tab and point to the connection for which you want to
change security settings. Click “Edit” to change settings.