VIORE LC22VF59 - Manual (Page 13)

11
HDMI VGA PC Y Pb Pr VIDEO L R RF
audio in Audio in
Connection
HDMI Connection
PC Connection
Note: All cables shown are not included with the TV.
Note: All cables shown are not included with the TV.
DVD or VCR
- Connect the HDMI jack on the DVD to the HDMI jack on the TV set with a HDMI cable.
- Turn on the DVD, and select “HDMI” in the input source menu.
- HDMI(High Definition Multimedia Interface) is the first all digital consumer electronics A/V
interface that supports uncompressed standard. One jack supports both video and audio
information.
- Connect the RGB jack on the PC to the VGA jack on the TV set with a VGA cable.
- Connect the audio output jack on the PC to the PC IN jack on the TV set with a stereo audio
cable.
- Turn on the PC, and select “VGA” in the input source menu.
- If using a sound card, adjust the
PC sound as required.
- Set the video resolution of your
PC to 1024x768,60Hz on its
original monitor.
Make the connections between
the TV monitor and your PC,
switch on the monitor before
booting the PC.
You can now set your preferred
resolution from the choice
supported.
See the table of supported
resolutions on the right.
HDMI VGA PC Y Pb Pr VIDEO L R RF
audio in Audio in