VTech Nighty Nite Nature Light - Manual (Page 6)

5
LIGHT BULB REPLACEMENT
1. Locate the light bulb cover at the bottom of
the unit.
2. Make sure the unit is turned OFF. Use a coin
or screwdriver to open the cover.
3. Gently pull out the old light bulb and remove
the protection ring from the old light bulb.
4. Attach the protection ring to the new light bulb.
Place the protection ring around the new light
bulb and turn the ring until it is securely
fastened to the new light bulb. Carefully put
the new light bulb into the light bulb socket.
Please use a 4.8 volt, 0.3 A light bulb. Please
note the maximum power light bulb that can
be used is a 2.4 watt light bulb.
5. Replace the light bulb cover and secure the
screw using a coin or screwdriver.
VOL.
VOL.