VIEWSONIC NextVision N2010 - Manual (Page 23)

E
N
G
L
I
S
H
ViewSonic N2010 22
Channel Exchange:
To make TV channels exchanged.
For instance, if you expect to exchange
CH2 and CH10,
1.
From: use to select CH2.
2.
To: use to select CH10.
3.
Store: press ENTER, it will show “Ok”
instead of “Save.”
4. Press
EXIT to leave the page.
Channel Copy:
To make a copy of TV channel.
For instance, if you expect to make a copy of
CH2 to replace CH10,
1.
From: use to select CH2.
2.
To: use to select CH10.
3.
Store: press ENTER, it will show “Ok”
instead of “Save.”
4. Press
EXIT to leave the page.
Fine Tune:
Due to weak signal or wrong antenna configuration, the channels
may have the grainy picture. For the sake of tuning the channels precisely, you
are able to use Fine Tune to improve the problem.
Manual Store:
The function is to give a minute search for possible existing
channels and store them in memory.
For instance, if you expect to search for pos-
sible channels nearby channel 1,
1.
Move your cursor to “CH. NO.” Then press
channel number keys to select channel 1.
2. a) Search by channel frequency:
Move your cursor to “Search.”
Press or to search the possible chan-
nels nearby channel 1.
b) Search by System:
Move your cursor to “System.”
Press or to select the desired system
between B/G/H, D/K, L, L’, I, and ALL. At
this time, the channel frequency will change
with the system.
3. Once the channel is found, move your cur-
sor to “Store,” then press
ENTER to store
it. The stored channel will replace channel
1.
S e l e c t
A d j u s t
C h a n n e l E x c h a n g e
From : CH 0
To : CH 0
Store : Save
S e l e c t
A d j u s t
C h a n n e l C o p y
From : CH 0
To : CH 0
Store : Save
S e l e c t
A d j u s t
M a n u a l S t o r e
Search:
System:
CH.NO:
Store:
45MHz
ALL
0
save