VTech 20-2432 - Manual (Page 34)

33
Handset and Base Operation Handset and Base Operation Handset and Base Operation Handset and Base Operation Handset and Base Operation
Line in Use Indication Line in Use Indication Line in Use Indication Line in Use Indication Line in Use Indication
Active (off-hook) Handsets: Active (off-hook) Handsets: Active (off-hook) Handsets: Active (off-hook) Handsets: Active (off-hook) Handsets:
During a call, the Handset/Base screen
will display, in the upper left corner, the
LINE LINE LINE LINE LINE icon(s) and the HANDSET/BASE HANDSET/BASE HANDSET/BASE HANDSET/BASE HANDSET/BASE
number(s) (1 – 8; 0 for the Base) currently
in use.
Low Battery Indication Low Battery Indication Low Battery Indication Low Battery Indication Low Battery Indication
When a low battery is detected, the Battery icon will flash and a warning beep
is played. The status message LOW BATTERY LOW BATTERY LOW BATTERY LOW BATTERY LOW BATTERY will also be displayed when
the Handset is in idle mode. To prevent an unexpected call drop, a drained
Handset battery should be replaced by a fully charged spare battery.
When both lines are in use at the same time, the L_EXTENSION IN USE L_EXTENSION IN USE L_EXTENSION IN USE L_EXTENSION IN USE L_EXTENSION IN USE
message will alternate between 11111 and 2. 2. 2. 2. 2.
Switching from the Handset Earpiece to Handsfree Switching from the Handset Earpiece to Handsfree Switching from the Handset Earpiece to Handsfree Switching from the Handset Earpiece to Handsfree Switching from the Handset Earpiece to Handsfree
While on a call using the Handset earpiece, press HANDSFREE HANDSFREE HANDSFREE HANDSFREE HANDSFREE on the lower
left portion of the Handset.
To return to the Handset earpiece, press HANDSFREE HANDSFREE HANDSFREE HANDSFREE HANDSFREE again.
Base Speakerphone Operation Base Speakerphone Operation Base Speakerphone Operation Base Speakerphone Operation Base Speakerphone Operation
The Base of your 20-2432 20-2432 20-2432 20-2432 20-2432 is equipped with a duplex Speakerphone. This is
a very useful feature for handsfree conversations or conference calls at the
base unit. For more information, refer to MAKING CALLS MAKING CALLS MAKING CALLS MAKING CALLS MAKING CALLS in HANDSET HANDSET HANDSET HANDSET HANDSET
AND BASE OPERATION. AND BASE OPERATION. AND BASE OPERATION. AND BASE OPERATION. AND BASE OPERATION.
Idle (on-hook)Base Unit: Idle (on-hook)Base Unit: Idle (on-hook)Base Unit: Idle (on-hook)Base Unit: Idle (on-hook)Base Unit:
During a call, the idle Base screen will
display, in the upper left corner, the LINE LINE LINE LINE LINE
icon(s) and the HANDSET HANDSET HANDSET HANDSET HANDSET number(s)
currently in use.
Idle (on-hook) Handsets: Idle (on-hook) Handsets: Idle (on-hook) Handsets: Idle (on-hook) Handsets: Idle (on-hook) Handsets:
During a call, the idle Handset(s) will
display:
When one or both lines are currently
in use by a parallel set (a telephone
device other than your 20-2432 20-2432 20-2432 20-2432 20-2432
system), all registered Handsets and
Base will display:
Advanced OperationsAdvanced OperationsAdvanced OperationsAdvanced OperationsAdvanced Operations