Vivitek RP56HD21-A - Manual (Page 30)

Using Picture-In-Picture (PIP) Mode
When the picture-in-picture (PIP) mode is active, one picture is displayed on
the full screen (main picture) and the other picture is displayed in a small
window (sub-picture).
To control PIP mode using the universal remote control:
1
Press the TV component button.
2
Press the PIP button on the remote control once to turn on PIP mode. A
small window appears in one corner of the screen. The picture on the full
screen is the main picture. The picture in the window is the sub-picture.
Press the STYLE button to select one of the other preset PIP modes.
See the user guide that came with your Micro Chip Display Projection
TV for additional information.
3
Press the POSITION button one or more times to move the window to a
different area of the screen.
4
Press the SWAP button to swap the main picture and the sub-picture.
5
Press any one of the direct input buttons (TV1, AV1, AV2, etc.) on the
remote control to change the video input source for the main picture.
6
Press the SOURCE button on the remote control one or more times to
change the video input source for the sub-picture.
Go to “Universal Remote Control Buttons” on page 2 for information about
the other buttons on the universal remote.