VocoPro DVG-777K - Manual (Page 15)

15
1. Track 14
2. Track 7
3. Track 3
4. Track 1
1. Press the PROGRAM button to enter Program mode
2. Press 14 and then ENTER
3. Press 7 and then ENTER
4. Press 3 and then ENTER
5. Press 1 and then ENTER
6. Press PLAY to begin playing in this order
7. Press STOP twice to exit the programmed playlist
Clearing a track in Program Mode
Press the CLEAR button on the remote control to erase the last programmed track.
Using Digital Key Control
Digital Key Control allows you to change the musical key of disc music to fit any singer’s vocal range. The Digital
Key Control buttons are located on the remote control and front panel
b - Lowers the musical key
(remote control only) - Resets the musical key back to the original or natural key
# - Raises the musical key
NOTE: Karaoke mode must be on in order to use Digital Key Control
Turning Karaoke Mode On and Off
Press the KARAOKE button on the remote control to turn Karaoke Mode on and off.
Setting Repeat Options
Press the REPEAT button on the remote control to cycle through the available Repeat options
• REP-ONE: Repeats the same song continuously
• REP-ALL: Repeats the entire disc after it has played through
• REPEAT OFF: All Repeat options are off
• CHAPTER REPEAT (DVD only): Repeats the current chapter on a DVD disc
• TITLE REPEAT (DVD only): Repeats the current title on a DVD disc
Switching Between PAL and NTSC Video Modes
The DVG-777K is defaulted to NTSC. Use the P/N button on the remote control to switch between PAL and
NTSC.
1. Press the P/N button on the remote control
2. Press ENTER on the remote control. The video mode will change
PAL: Europe and Asia
NTSC: North America
General Operations