Vox AD100VT-XL - Manual (Page 25)

25
E
FFECTS
The XL-series provides eleven of the most popular effects (some effects actually com-
bine two effects). you can adjust the SPEED parameter of modulation effects or the TIME
parameter of delay/reverb effects simply by pressing the TAP switch twice. In addition to
using the EDIT 1 knob to adjust the most important parameters, you can make more
detailed adjustments by holding down the TAP button or BYPASS button while turning the
EDIT 1 knob.
NOTE: In order to adjust the effect parameters, Effect Bypass must be off (BYPASS LED
dark). If you hold down the TAP switch and turn the EDIT 1 knob when bypass is on
(BYPASS LED lit), you’ll be adjusting the noise reduction — not the effect parameter.
HINT: If don’t want to use an effect in a channel program, select either DELAY or
REVERB as the effect type, and turn the EDIT 1 knob all the way to the left. This will set
the DELAY LEVEL or REVERB LEVEL to the minimum setting.
OCTAVE
This effect generates a note one octaves lower than the one you're playing, adding thick-
ness and "weight" to single note lines.
HINT:Like all pedals of this type, OCTAVE only works with single notes...chords confuse
the heck out of it! NOT a fault - that's just the way these pedals operate.
TYPE TAP EDIT 1
EDIT 2
[TAP+EDIT 1] EDIT 3
[BYPASS+EDIT 1]
OCTAVE OCTAVE LEVEL
COMP COMP SENS COMP ATTACK
COMP+PHASER PHASER SPEED COMP SENS PHASER SPEED PHASER RESONANCE
COMP+CHORUS CHORUS SPEED COMP SENS CHORUS SPEED CHORUS MIX
CHORUS+DELAY DELAY TIME DELAY LEVEL DELAY TIME CHORUS MIX
CHORUS+REVERB CHORUS SPEED REVERB LEVEL CHORUS SPEED CHORUS MIX
FLANGER+REVERB FLANGER SPEED REVERB LEVEL FLANGER SPEED FLANGER RESONANCE
TREMOLO+REVERB TREMOLO SPEED REVERB LEVEL TREMOLO SPEED TREMOLO DEPTH
ROTARY+REVERB ROTARY SPEED REVERB LEVEL ROTARY SPEED ROTARY SENS
DELAY DELAY TIME DELAY LEVEL DELAY TIME DELAY FEEDBACK
REVERB REVERB TIME REVERB LEVEL REVERB TIME REVERB HIDAMP
EDIT1 “MIX” Adjusts the mix level of the note one octave below.