Vertex Standard VX-2500V - Manual (Page 15)

15
Alignment
[1] Common RX
- [0] Tight NSQL
This parameter is used to align the noise level in squelch
Tight. It adjusts this alignment RX Tuning after ending.
¦
Select the MID frequency channel in alignment
range.
¦
Set the SG output level to 0dBm EMF, and obey
the message.
- [1] Threshold NSQL
This parameter is used to align the noise level in squelch
Threshold. It adjusts this alignment RX Tuning after end-
ing.
¦
Select the MID frequency channel in alignment
range.
¦
Set the SG output level to –7dBm EMF, and obey
the message.
- [2] RX Tune
This parameter is used to align RX Tune.
¦ Select the MID frequency channel in alignment
range.
¦
Set the SG output level to –6dBm EMF.
¦ Pressing the [DWN] key, reduce the RX Tune
Level and set the SINAD above 12dB.