Vivitar ViviCam 8225 User Manual
Page 8
7
Note:
1.
In order to charge your lithium battery, make sure the battery is inserted correctly and then
connect your camera to an on and running PC with the USB cable provided. The red LED will
light up indicating that your camera is in charging mode. The LED will switch off when your
camera is fully charged after a few hours.
2.
A “Low battery” message will flash on the LCD when the battery power is insufficient. Shortly
thereafter your camera will power off.
3.
Please remove your battery when you don
‟t intend to use your camera for a long time.
4.
Test photos taken with the camera should be downloaded otherwise they will be lost when the camera
loses power and turns off or when the battery door is opened to replace the battery.