Network – Vivotek PZ7121 User Manual

Page 32

Advertising
background image

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

32 - User's Manual

Network

This section explains how to configure wired network connection for the Network Camera.

Network Type

LAN

Select this option when the Network Camera is deployed in a local area network (LAN) and is intended

to be accessed by local computers� The default setting of Network Type is LAN� Rememer to click

Save

when you complete the Network setting�

Get IP address automatically: Select this option to obtain an available dynamic IP address assigned by a

DHCP server each time the camera is connected to the LAN�

Use fixed IP address: Select this option to manually assign a static IP address to the Network Camera�

1� You can make use of VIVOTEK installation wizard 2 (IW2) on the software CD to easily set up the

Network Camera in LAN� Please refer to Software installation on page 11 for details�

2� Enter the static IP, Subnet mask, Default router, Primary DNS provided by your ISP�

Enable UPnP presentation: Select this option to enable UPnP

TM

presentation for your Network Camera

so that whenever a Network Camera is presented to the LAN, shortcuts of connected Network Cameras

will be listed in My Network Places� You can click the shortcut to link to the web browser� Currently,

UPnP

TM

is supported by Windows XP or later. Note that to utilize this feature, please make sure the

UPnP

TM

component is installed on your computer�

Enable UPnP port forwarding: To access the Network Camera from the Internet, select this option to

allow the Network Camera to open ports on the router automatically so that video streams can be sent

out from a LAN� To utilize of this feature, make sure that your router supports UPnP

TM

and it is activated�

Network Camera (192.168.5.151)

Advertising
This manual is related to the following products: