VocoPro 8800 - Manual (Page 4)

remote key control
You can either run the UHF-5800 mics through the VSP-M1 or go straight into the KJ-7800PRO mixer.
Using either a pair of XLR(f) to XLR(m) or XLR(f) to ¼” cables:
1. Connect the XLR(f) end to the LEFT BALANCED OUPUT
on the rear panel of the
VSP-M1.
2. Now connect the XLR(m) or ¼” end to MIC input 1 on
the front of the
KJ-7800PRO.
3. Follow the above steps, now going from the RIGHT
BALANCED OUPUT on the
VSP-M1 to MIC input 2 on the
front of the KJ-7800PRO.
���������������
�������
��������
������� �������
���� ����
���������������
-BRIDGE+
����� ��������������
������
���� ������
��
���
����
����
VX-15 Speaker #1 VX-15 Speaker #2
VX-15 Speaker #3 VX-15 Speaker #4
VP-2100PRO to VX-15 speakers
VSP-M1 to KJ-7800PRO
UHF-5800 wireless microphones
4
5
6
UHF 5800 UHF 5800
VSP M1 KJ 7800
VSP M1
KJ 7800
VP 2100
Speakers 1 and 2
Using the SPEAKON style to ¼” adapter and ¼”(m) to ¼”(m)
cable (included):
1. Connect the SPEAKON style end to CH.1 on the rear panel of
the VP-2100PRO
2. Connect one end of the ¼” cable to the ¼” end of the adapter
3. Connect the other end of the ¼” cable to one of the four VX-15’s.
3. Repeat this for the second speaker, except now connect the
SPEAKON style end to CH. 2 on the VP-2100PRO and the ¼”
end to the second VX-15 speaker.
Speakers 3 and 4
Using a ¼”(m) to ¼”(m) cable
1. Connect one end of the ¼” cable to the open ¼” jack on the
rear of Speaker 1
2. Connect the other ¼” end to the back of the 3rd speaker.
3. Repeat this for the final speaker now going from the back of
Speaker 2 and into the 4th speaker.