Vivitar Vivicam 3350B - Manual (Page 17)

-14-
4.4 Power-Off the Camera -
Press and hold the Power/Menu button for 2 second to turn-off the camera
immediately.
Note: The camera will automatically power-off after thirty seconds of
inactivity.
4.5 Self-Timer -
If you would like to get into the image you may use the self-timer feature to
delay image capture by ten (10) seconds. Place the camera on a tripod or
a flat, stabile surface. Turn on the camera. Press the Menu button until
the “
” icon appears on the information display.
Press the shutter button within three seconds into Self Timer Mode. Press
the shutter button again and the camera will beep as it counts down. The
camera will capture an image automatically after 10 seconds.
4.6 Continuous Capture -
You can capture three images using the continuous capture feature. To
use the Continuous Capture mode follow these steps:
Step 1: Power on camera. Press the Menu button two times until the “ ”
icon appears in the display.