ViewEra V151BN - Manual (Page 24)

23
3.4) OSD Timer
a. Press UP or DOWN to move the highlight to OSD Timer and press “ 1” to enter.
b. Press “ 1” to adjust the length of time in seconds for which OSD menu appears on the screen. Then press “ 2”
to confirm the adjustment and back to Feature Controls menu.
4) Factory Recall
a. Press UP or DOWN to move the highlight to Factory Recall and press “ 1” to recall preset values.
3.3 OSD menu in AV mode
When OSD menu is not present on the screen, you can press “ 2” to switch the signal source to AV mode. Press
“1” to get OSD menu in AV mode and press UP or DOWN to move the highlight to Video, Audio, or Feature
Controls. For the adjustment of each feature, please refer to section 3.2.