Operations – VocoPro DA-1055 PRO User Manual
Page 12
Basic Operations
ATTENTION:
Before turning on the DA-1055 PRO’s power, make sure it is connected to a power outlet, power
strip or surge protector. It is recommended that you use a surge protector for increased protection.
1.Turning on the Power
Switch the
POWER button on the front panel of the DA-1055 PRO to the ON position to turn it on and
switch it to the
OFF position to turn it off.
2.Turning on the EQ channels.
Each
EQ channel, Left and Right, can be turned on and off individually using the white EQ on buttons.
For each
EQ Channel:
1. Press the
EQ ON button in to turn on. The green LED indicator will light up when it is on.
2. Press the
EQ ON button again to turn off. The green LED indicator will turn off.
3.Using the Vocal Cancel Feature
Vocal Cancel eliminates the vocal track on Multiplex formatted
CD+G discs allowing the singer to sing along
to music only. The
VOCAL CANCEL button is located on the front panel of the DA-1055 PRO.
NOTE: Make sure that your CD+G disc is Multiplex formatted or else you will not be able to cancel the
vocal track.
1. Press the
VOCAL CANCEL button IN to turn on the Vocal Cancel feature.
2. Press the
VOCAL CANCEL button OUT to turn off the Vocal Cancel feature and return to normal mode.
4.Switching Between Input Channels
If you have two source players connected, you can only play one at a time. When playing one, you must set the
DA-1055 PRO to the correct input channel using the SOURCE button on the front panel.
1. Press the
SOURCE button IN to turn on the CDG channel.
2. Press the
SOURCE button OUT to turn on the DVD channel.
Operations
6
1
2
2
3
4