Wireless configuration – VIEWSONIC WPCC100 User Manual
Page 12
ViewSonic Wireless PC Card Adapter
9
8
Complete the Wireless Configuration procedure for your
operating system:
•
If you are using Window XP, complete the instructions
in the next section, Wireless Configuration.
•
If you are using Windows 98SE, ME, or 2000, see the
Appendix for configuration instructions.
Wireless Configuration
SUGGESTION: To configure your WPCC100, you will need the
configuration settings (Network Name [SSID], security settings,
etc.) of your wireless router or gateway. For your convenience,
write down these settings for later reference.
To configure your WPCC100 with Windows XP, do the following:
1
From the Windows XP desktop, right-click the Wireless
Monitor utility icon on the Windows status bar (shown
below), then select Enable Windows Zero Configuration
(WZC).
Wireless Monitor utility icon
PC Card UG.book Page 9 Friday, July 23, 2004 2:39 PM