Vector VEC012AP - Manual (Page 8)

6
USE AS A JUMP-START SYSTEM
WARNING:
1. Before using this system to jump-start any vehicle or boat, read and understand
all instructions, safety tips, warnings, cautions and first aid information pro-
vided in this manual and on the product labeling. Additional important infor-
mation may also be provided by the vehicle’s battery system manufacturer.
2. Be aware of first aid procedures before attempting jump-start procedure.
3. Always wear protective eyewear when working with a lead acid-type battery.
4. Do not smoke or use inflammable items (matches, cigarette lighters, etc.) while
working on a vehicle’s battery system.
5. When using this jump-starter in proximity to the vehicle’s battery and engine,
stand the unit on a flat, stable surface, and be sure to keep all cords and
cables away from any moving parts.
6. Check unit periodically for wear and tear. Replace worn or defective parts
immediately; contact Vector Customer Service Department toll-free:
(866) 584-5504 or through our Internet address www.vectormfg.com.
7. Do not attempt to jump-start a frozen battery.
8. NEVER submerge this unit in water.
9. Do not wear vinyl clothing when jump-starting a vehicle, friction can cause
dangerous static electricity sparks. Remove all jewelry or metal objects-they can
cause short circuits or react with battery acid to cause severe burns. Remove
or secure any loose clothing, and restrain long hair, before attempting jump-start
procedure.
10. Lead-acid batteries generate hydrogen gas during normal operation. More
gas is generated when the battery is charging. Hydrogen gas is explosive,
poisonous to breathe and highly flammable.
Recommendations for optimum performance of the VECTOR ® jump-starter:
CAUTION:
1. To avoid possible damage that may shorten the unit’s working life, protect this
unit from direct sunlight, direct heat and moisture.
2. This system is to be used ONLY on vehicles, boats, garden tractors and gaso-
line powered generators with 12 Volt DC battery systems.
3. This system is NOT designed to be installed as a replacement for a vehicle battery.
4. Vehicles that have on-board computerized systems may be damaged if vehicle
battery is jump-started. Before jump-starting this type of vehicle, read the vehicle
owner’s manual to confirm that external-starting assistance is advised.
5. Excessive engine cranking can damage the vehicle’s starter motor. If the engine
fails to start after the recommended number of attempts, discontinue jump-start
procedure and look for other problems that may need to be corrected.
6. This VECTOR ® jump-starter is equipped with an internal, automatic safety switch.
This switch only activates when connections to the battery are correctly made
positive (+) to positive (+) and negative (-) to negative (-). An incorrect connection
will sound an audible alarm indicating an incorrect connection. Should this
alarm sound, remove the clamps and reconnect ensuring proper polarity.
Once the connections are properly made, the internal switch turns on and you
are ready to jump-start the vehicle. This automatic internal safety switch is fully
automatic and requires no action by the user.
VEC012AP•ManuaL 12/02.qxp 12/20/02 5:07 PM Page 6