VIEWSONIC VNB100 Netbook VS12570 - Manual (Page 29)

ViewSonic VNB100
20
3. Click the up/down direction keys to select “Boot Type Order” and click the Enter button to
enter the below menu:
4. Click the “Shift” + ”+”or click ”-“ directly to remove the item position and then click the
up/down direction button to select the startup option. Proceed to click F10 to popup the
dialogue box and select “Yes” firstly, then click “Enter” to save the setting as shown below:
There is no need to change the startup order and click F12 directly to select the
temporary startup option after turning on the unit.
9-3 System Recovery Management
9-3-1 One Key for System Recovery
If the system becomes corrupted or is erased, you needs to reinstall the operating system and
software and etc. Use the system recovery to restore the hard disc of your computer when you
purchased. Please refer to operate as following step:
1.
Turn on the Notebook PC, then press F3 button when the screen shows “To Start
Windows Recovery，Press【F3】 Function Key … ”.
2. Read “Notes” on the dialogue box that popped up afterwards, then click “OK” to enter
“System Recovery” and click “Recover”.
3. “Recover completed, Click ‘OK’ to restart computer.” would appear in several minutes,
then click “OK” and restart the computer to recover the system to the factory status.