Verilux Mood Enhancement System VT01 - Manual (Page 5)

6
3
1.
Read these instructions
– bef
ore using this lamp
.
2.
K
eep these instructions
– f
or future ref
erence
.
3.
Heed all warnings.
4.
Follo
w all instructions.
5.
Do not use this lamp in damp/humid or w
et locations
.
6.
F
or indoor use only
.
7.
Clean only with dr
y cloth.
8.
Do not b
loc
k an
y v
entilation openings
.
9.
Do not place near an
y heat sources such as r
adiators
, heat
registers
, sto
v
e
s
, or other appar
atus (including amplifi
ers) that
produce heat.
10.
Do not def
eat the saf
ety pur
pose of the polar
iz
ed plug.
A polar
iz
ed
plug has tw
o b
lades with one wider than the other
. The wider b
lade
is pro
vided f
or y
our saf
ety
. If the pro
vided plug does not fi
t in y
our
outlet, consult an electr
ician f
or replacement of the obsolete outlet.
11.
Protect the po
w
er cord from being w
alk
ed on or pinched par
ticular
ly
at plugs
, con
v
enience receptacles
, and the point where it e
xits from
the lamp
.
12.
Only use attachments/accessor
ies specifi
ed b
y
the man
uf
acturer
.
13.
Unplug this lamp dur
ing lightning stor
ms or when un
used f
or long
per
iods of time
.
14.
If the lamp has been damaged in an
y w
a
y,
such as po
w
er-supply
cord or plug is damaged, liquid has been spilled or objects ha
v
e
fallen onto the lamp
, the lamp has been e
xposed to r
ain or moisture
,
does not oper
ate nor
mally
, or has been dropped, it should not be
oper
ated.
There are no user ser
viceab
le par
ts within this lamp
.
SA
VE THESE
INSTR
UCTIONS
IMPOR
T
ANT SAFETY INSTRUCTIONS
SET
-UP INSTRUCTIONS
Bulb & Diffuser installation 1.
Inser
t b
ulb into lamp b
y
fi
r
m
ly holding b
ulb base and push into the
soc
k
et (See belo
w)
Note:
Make sur
e bulb is fully inser
ted into the socket. The bottom of
the bulb base should touch the plastic housing of the lamp. 2.
Attach the plastic diffuser to the lamp body b
y
fi
rst inser
ting the tab
located at the bottom of the diffuser (A) into the opening of the lamp base (B).
3.
Rotate the plastic diffuser and align the side snap tabs (C) into
position – press fi
r
mly to snap par
ts together
.
A
B
C