Verilux PLANETLIGHT PL05 - Manual (Page 4)

4
Assembly Instructions
Lamp Head
Base
Lower Shaft (C)
Middle Shaft (B)
Adjustment Knobs
Upper Shaft
Tightening Nut
Floor Switch
Upper Shaft (A)
Cord
Connectors
Read Instructions Carefully Before
Assembly:
1. Set all parts of lamp on a carpet.
2. Insert Middle Shaft (B) into
the Tightening Nut attached
to the Upper Shaft (A). Rotate
in clockwise manner to fasten
securely.
3. Plug cord connectors together at
base of lamp (Fig.1).
4. Secure lower shaft (C) to base
and tighten by rotating clockwise.
5. With lower shaft (C) and base
standing upward, fold extra cord
and insert into the lower shaft (C),
and screw together upper portion
of the lamp and lower portion until
the shafts are secure.
Fig. 1