Asus P6-M4A3000E - Manual (Page 56)

4-24 Chapter 4: BIOS setup
4.7 Tools menu
The Tools menu items allow you to configure options for special functions. Select
an item then press <Enter> to display the submenu.
4.7.1. ASUS.EZ.Flash.2
Allows you to run ASUS EZ Flash 2. When you press <Ok>, a confirmation
message appears. Use the left/right arrow key to select between [Yes] or [No], then
press <Ok> to confirm your choice.
Clear.User.Password
Select this item to clear the user password.
Password.Check.[Setup]
When set to [Setup], BIOS checks for user password when accessing the Setup
utility. When set to [Always], BIOS checks for user password both when accessing
Setup and booting the system. Configuration options: [Setup] [Always]
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
ASUS EZ Flash 2
Express Gate [Auto]
Enter OS Timer [10 Seconds]
Reset User Data [No]
AI NET 2
Press ENTER to run the
utility to select and
update BIOS.
This utility supports:
1.FAT 12/16/32 (r/w)
2.NTFS (read only)
3.CD-DISC (read only)
ASUSTek EZ Flash 2 BIOS ROM Utility V3.44
Current ROM Update ROM
A:
Note
FLASH TYPE: MXIC 25L8005
PATH: A:\
BOARD: M4A3000E
VER: 0305 (H:00 B:01)
DATE: 01/21/2010
BOARD: Unknown
VER: Unknown
DATE: Unknown
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [ESC] Exit