VocoPro THE SINGER'S ULTIMATE CHOICE DVG-909K - Manual (Page 23)

22
Repeating a Segment Using the
A-B Feature
Press the A-B (SHIFT +A-B) button
The starting point of the LOOP region is immediately
commenced after pushing A-B. Press the A-B button
again to establish the LOOP ending point.
To cancel the loop
Press the A-B button a third time.
NOTE: You cannot search and skip tracks while using the
A-B feature.
Programming Playback
Press the PROG (program) button when a disc is stopped.
You can select up to 20 tracks to program. The program
is maintained until the STOP button is pressed twice, the
disc is removed or the unit is turned off.
To program tracks
1. Press the PROG (program) button
2. Using the number pad on the remote, enter the track
numbers in the order that you want them to play.
If you want to program the tracks to play in the following
order:
1. Track 5
2. Track 3
3. Track 11
4. Track 1
Press the PROG button
Press “5” then press ENTER
Press “3” then press ENTER
Press “11” then press ENTER
Press “1” then press PLAY to begin the program
To stop playback but remain in program mode press STOP
once
To exit program mode, press the STOP button twice.
Advanced operations
Repeat Segment
Program Playback