Vivitar Tripod/Video Equipment - Manual (Page 65)

EN-65
Setup Menu
This feature allows you to choose your ViviCam 8400‘s default settings.
1. Rotate the mode dial to (Setup) mode and turn your ViviCam 8400 on.
2. Press ,then use W or X to select the [Set-up1] / [Set-up2] / [Set-up3] menu.
3. Use S or T to select the desired option item, then press the
button.
4. To exit from the setup menu, turn the dial to any other mode.
Set :
TV
LCD Brightness
NTSC
NTSC
PAL
USB Mode PC
Auto Shut Down
Set-up1 Set-up3 Set-up2
3 Min.
1 / 4
Set-up1
Set :
Date & Time
Language
m/d/y
Louder
English
Y/M/D
Set-up3 Set-up2
Format
Beeper
1 / 4 Set : 1 / 3
Reset Number 1
Set to Default
V. Version
Set-up1 Set-up3 Set-up2
Item Functional Description
Format Erases all images and reformats the SD card loaded in your ViviCam 8400. Protected
images are also erased. SD card cannot be formatted if it is write-protected.
Refer to the section in this manual titled “Formatting an SD Memory Card or Internal
Memory” for further details.
* Yes / No
Beeper This sets whether or not to mute the startup sound, and the camera sound each
time you press a camera button.
* Louder / Soft / Off
Date & Time This sets the date and the time.
Refer to the section in this manual titled “Setting the Date and Time” for further details.
Language Sets the language that is displayed on the LCD monitor.
Refer to the section in this manual titled “Choosing the Screen Language” for further details.
* English / Français / Deutsch / Español / Italiano /
/
[Set-up1] settings
Y/M/D