Samsung SCH-I600MSAXAR - Manual (Page 5)

S M A R T P H O N E B A S I C S
■ Predictive Text Input
T9 requires only one key press per letter, and recognizes the most commonly used
word of a numeric sequence.
1.) While composing a message, press and hold until T9 appears in the upper
right corner of the display.
2.) Press the corresponding key on the keypad only once for each letter of the word
that you’re spelling. For example; to spell Verizon, press the following keys
only once.
V E R I Z O N
USING CONTACTS
■ Adding entries to Contacts
1.) At the Home Screen, press the right soft key Contacts.
2.) Press the left soft key New. The Contact entry screen appears in the display.
3.) Enter information using the keypad. Use the navigation key to move to another
entry field. Press the left soft key Done when finished.
■ Calling an entry in Contacts
1.) At the Home Screen, press the right soft key Contacts.
2.) Use the navigation key to highlight the contact that you wish to call.
3.) Press the right navigation key to switch between the different numbers available
for a contact.
6 MNO 6 MNO 9 WXYZ 4 GHI 7 PQRS 3 DEF 8 TUV
∗ ⇑
3.) Press . The contact’s number and Calling... appear in the display.
■ Programming speed dial numbers
Entries in your Contacts list can be assigned to a speed dial location on your keypad.
Contacts can be assigned to available speed dial locations from 2-99. Locations 0 and
1 are reserved.
1.) At the Home Screen, press the right soft key Contacts. Your list of contacts
appears in the display.
2.) Use the navigation key to highlight the contact that you wish to add to speed dial,
then press .
3.) Use the navigation key to highlight the number you’d like to add to speed dial (if
more than one number exists).
4.) Press the right soft key Menu. A pop-up menu appears in the display with Add
Speed Dial highlighted.
5.) Press . The Add Shortcut screen appears in the display.
6.) Use the navigation key to highlight the Keypad assignment field.
7.) Use the navigation key to select an available keypad assignment.
8.) Press the left soft key Done when finished.
■ Placing a call using speed dial numbers
1.) At the Home Screen, press and hold the key assigned to the speed dial number
that you wish to call.
2.) Calling... appears in the display along with the phone number. After you are con-
nected, the name of the contact assigned to the speed dial location appears in
the display.
OK
OK
SEND
Page 7 Page 8
▲
Verizon i600 QRG 8-21-03.qxd 8/21/2003 1:53 PM Page 5