Victory Refrigeration RS-3N-S7 - Manual (Page 2)

Victory participates in the KCL CADalog, the most current source of CAD symbols for foodservice designers worldwide. Symbols include
standard equipment in plan, side, front and 3-D views, layered for FEDA/FCSI recommended guidelines.
Continuous product development may necessitate specification changes and design without notice.
Victory Refrigeration, Inc. Shallow Depth Refrigerators
CHARACTERISTICS ONE SECTION TWO SECTION
Reach-In Reach-In
Width, Overall 31 1 / 4
58 3 / 8
Depth, Overall (incl. handles) 29 7 / 8
29 7 / 8
Height, Overall (incl. adj. legs) 84 84
Depth, Door(s) Open 90º 58 1 / 4
54
Clear Door Width 23 3 / 8
22 1 / 8
Clear Full Door Height 55 1 /
4
55 1 /
4
Clear Half Door Height 25 3 /
8
25 3 /
8
Capacity Net (cubic feet) 16.7 37.5
No. of Full Doors 1 2
No. of Half Doors 2 4
No. of Shelves 3 6
Shelf Area (sq. feet) 14.1 28.1
Cabinet Voltage 115/60/1 115/60/1
Feed Wires 2 2
Condensing Unit Voltage 115/60/1 115/60/1
Condensing Unit Size (HP) 1 / 3 1 / 3
Total Amperes 6.6 9.6
Crated dim. & wts. Ht. Width Depth Cu.Ft. Lbs
One Section 84 36 1 / 2 44 3 / 4 82.2 410
Two Section 84 63 5 /
8
44 3 /
4
143.3 635
Approximate Pass-Thru weights, add 15%
FOR REMOTE MODELS– Substitute an “R” for the “S” in suffix. For
example: Model RS-1D-S7 (self-contained) would be RS-1D-R7
remote cabinet. Air circulating fans, expansion valve and plasticized
coil are provided. Condensing units not supplied. The following units
are recommended with
1 / 2 ” O.D. Suction line, 1 / 4 ” O.D. Liquid line.
Dimensional tolerance ± 1 / 4 ” Metric dimensions (MM)
REMOTE REFRIGERATION
Cond. Unit BTUH Cabinet Amps
One Section 1 /
3
H.P. 2540 115/60/1 2.5
Two Section 1 /
3
H.P. 2540 115/60/1 3.4
For Remote Pass-Thru–Consult factory
Copyright June 2009
Printed in U.S.A. 063009
28.38
(721)
26.00
(660)
14.12
(358)
26.38
(670)
28.38
(720)
6.00 (152)
84.00
(2133)
31.31
(793)
22.50
(571)
55.25
(1403)
ELEC.
CONN.
29.88
(758)
53.12
(1349)
84.00
(2133)
6.00 (152)
58.44
(1482)
22.50
(571) 22.50
(571)
55.25
(1403)
ELEC.
CONN.
REACH-IN MODELS
NOTE: If cabinet is located
directly against wall an all
around clearance of 2” is
required, and a minimum
clearance of 10” under
ceiling.
We reserve the right to
change specifications and
product design without
notice. Such revisions do
not entitle the buyer to
corresponding changes,
improvements, additions or
replacements for previously
purchased equipment.