ViewEra V151 - Manual (Page 25)

24
3.3 OSD menu in Video mode
When OSD menu is not present on the screen, you can press “ 2 ” to switch the signal source to
composite video (CVBS) or S-Video. Press “ 1 ” to get OSD menu in Video mode and press “
△
” or “
▽
“ to
move the highlight to Video, Audio, or Feature Controls. For the adjustment of each feature, please
refer to section 3.2.
3.3.1 Video menu
Press “ 1 ” button to get the OSD, then press “ 1 ” to enter the Video adjustment.Press “
△
” or “
▽
“ to move
the highlight to Video sub-menu then press “ 1 ” button to enter the adjustment,which is done by
pressing “
△
” or “
▽
“ .Move the highlight to Contrast, Brightness, Sharpness, Color Temperature, User
RGB, Image, or Reset by pressing “
△
” or “
▽
“ .
3.4 Hot Key
Press “
▽
” key once, sound is muted. Press “
▽
” key once again, sound is enabled.
Press “
△
” key once to enter Volume adjustment menu and then press “
△
” or “
▽
“ to increase or decrease
the degree of volume. Then exit automatically by OSD timer setting.