VIEWSONIC Optiquest Z50 - Manual (Page 11)

E
N
G
L
I
S
H
10 Optiquest Z50
Other Information
Preset Timing Modes
Recommended Timing Mode for this monitor is: VESA
®
800 x 600@ 75 Hz
1 Macintosh models prior to G3 require a Macintosh adapter. To order a Macintosh adapter, contact
ViewSonic Customer Support. You will need to provide serial number of the product.
2 Warning: Do NOT set the graphics card in your computer to exceed these Maximum Refresh Rates;
doing so could result in permanent damage to the monitor.
Specifications
CRT Type
Phosphor
Glass surface
15” (13.8” viewable diagonal area). 0.24 mm
Horizontal, 0.14 mm Vertical, and 0.28 mm diagonal
dot pitch, 90
o deflection
RGB, medium-short persistence
Anti-glare, anti-static coating
Standard light transmission rate = 57%
Input Signal Video
Sync RGB Analog (0.7 Vp-p, 75 Ohms
f
H
: 30-56 kHz, f
v
: 50-120 Hz
HV Separate (TTL), Composite
Compatibility PC
Macintosh
1
VGA up to 1024 x 768 NI
Power Macintosh (up to 832 x 624)
Timing Modes (with
Maximum Refresh
Rates
)2
1024 x 768 @ 70 Hz
800 x 600 @ 89 Hz
640 x 480 @ 110 Hz
Power Voltage AC 100-240 (auto switch) 47/63 Hz
Display Area Default
Full scan 266 mm (H) x 200 mm (V) (Typical)
284 mm (H) x 213 mm (V) (Depends on signal timing)
Operating
Conditions Temperature
Humidity
Altitude 32° F to 104° F (0° C to +40° C)
5% to 95% (no condensation)
To 10,000 feet
Storage Conditions Temperature
Humidity
Altitude -40° F to +140° F (-40° C to +60° C)
5% to 95% (no condensation)
To 50,000 feet
Dimensions Physical
(monitor) 362 mm (W) x 370 mm (H) x 397 mm (D)
14.2” (W) x 14.6” (H) x 15.6” (D)
Weight Net 12.0 kg (26.4 lb) (monitor only)
Regulations UL, cUL, DHHS, FCC-B, CE, E
NERGY
S
TAR
® , CB,
MPRII
Power Saving
Modes On
DPMS
TM Stand By
DPMS Suspend
DPMS Of
< NORMAL (Green LED)
< 15W (Yellow LED)
< 15W (Yellow LED)
< 8W (Yellow LED)
VGA 640 x 400 @ 70 Hz
VESA640 x 480 @ 60, 75, 85 Hz
VESA 800 x 600 @ 72, 75, 85 Hz VESA 1024 x 768 @ 60 Hz
Macintosh
® 640 x 480 @ 67 Hz
Macintosh 832 x 624 @ 75 Hz