Vizio VA220E - Manual (Page 16)

VIZIO VA22 0E User’s Manual
Version 12/12/2008 16
www.VIZIO.com
Connecting Your Cable or Satellite Box
You have four options for connecting your cable or satellite box to your HDTV: HDMI, Component,
Composite, or Coax (RF). Based on your home theater configuration, you can decide which option is the
right one for you. Refer to your set-top box user manual for more information about the video output
requirements or consult your cable or satellite operator.
Using HDMI (Best)
Cable and satellite boxes that have a HDMI digital interface should be connected to the HDMI input on
your HDTV for optimal results.
NOTE: To maintain the display quality, use a
VIZIO certified HDMI cable. Length is available
up to up to 32.8 feet (10 meters). See
www.VIZIO.com or call 1-888-VIZIOCE (1-888-
849-4623) for details.
1. Turn off your HDTV and set-top box.
2. Connect the HDMI cable from the from the HDMI OUT jack on your set-top box to an
available HDMI jack on the back or side of your HDTV.
3. Turn on your HDTV and set-top box.
4. Press
HDMI repeatedly on the remote control to view the content. You can also press
INPUT on the remote control.
NOTE:
• If HDMI1 is being used, connect to the HDMI2 port instead.
• The HDMI input on the TV supports High-bandwidth Digital Content Protection
(HDCP). HDCP encrypts the transmission between the video source and the
digital display for added security and protection.