VIEWSONIC WPG-150 - Manual (Page 31)

ViewSonic WPG-150 27
E
N
G
L
I
S
H
U
PGRADE
F
IRMWARE
IMPORTANT! After upgrading the firmware, you need to uninstall the software from your PC. To
uninstall the software from your PC, click the Windows
® Start button > click Programs >
ViewSonic WPG > Uninstall.
IMPORTANT NOTE! Your WPG LAN port must be connected to the Internet in order for the
device to check for an updated firmware.
From the Configure WPG screen, click Upgrade Firmware. If your firmware is the latest version,
the screen below appears.