Vizio C-DR161 CU - Manual (Page 6)

6
1 13
12
14 11 6
7
8
9
10 4
5
2
3
KEY LOCK
MONITOR 2
DVD
DIGITAL VIDEO RECORDER C-DR161
HD FULL
FAILURE
REC MONITOR 1 SEQUENCE SCREEN
MULTI
ZOOM
SEARCH ALARM RESET
BUZZER STOP/
REC
PRIORITY
16
8
15
7
14
6
13
5
12
4
11
3
10
2
9
1 ARCHIVE
MENU/
ENTER
2. NOMENCLATURE AND FUNCTIONS
[ C-DR161 Series Front ]
(1) Power key [ ]
Pressing the Power key changes the Digital
Video Recorder's mode from standby to
operation mode. To switch from operation mode
to standby mode, hold down the Power key for 2
seconds or more.
(2) Camera selector key
Pressing the Camera selector key displays the
corresponding camera image on the full screen.
(3) Priority recording key
Used to start priority recording. To stop priority
recording, hold down the Priority recording key
for 2 seconds or more. The Priority recording
key flashes red during priority recording.
(4) Monitor key
Use this key when switching operation between
Monitor 1 and Monitor 2 outputs.
Monitor 1 output is enabled when the key is
unlit, and Monitor 2 output is enabled when the
key is lit.
(5) Buzzer stop key (Alarm reset key)
Use this key to reset alarm event recording.
This key is also used to stop a buzzer tone.
(6) Zoom key
Use the Zoom key to zoom in on the live and
playback screens (2x zoom).
(7) Search key
Use this key to search for recorded images.
(8) Multi-Screen / [-] Key
• Display on the multi-segment split screen.
• Pressing this key while setting values are
selected on the menu screen varies setting
values in the reverse direction.
(9) Menu key
• Holding down the Menu key for 2 seconds or
more when in live mode displays the menu
screen on Monitor 1 screen.
• Use this key when confirming selected setting
items on the menu screen.
• Holding down the Menu key for 2 seconds or
more when the Security setting is activated
displays the Password entry screen.
(10) Sequence/ [ + ] Key
• Pressing the Sequence key in live mode
causes the camera outputs to be displayed in
preprogrammed sequential order.
• Pressing the setting value on the Menu screen
during selection changes the setting value in
forward direction.
(11) Reverse playback [ ] key
• Images are played back in reverse if the
Reverse playback key is pressed.
• Use this key to move the cursor to the left on
the menu screen.
(12) Pause [ , ] key
• Use this key to temporarily stop the playback
display. Operation can be performed for the
archive menu display, frame advance/reverse
playback, and instant event access playback
while the display is temporarily stopped.
• Used this key to move the cursor upward on
the Menu screen.
(13) Stop [ , ] key
• Use this key to stop playback or reverse
playback.
• Use this key to move the cursor downward on
the Menu screen.
(14) Playback [ ] key
• Pressing the Playback key plays back
recorded images.
• Use this key to move the cursor to the right on
the Menu screen.