Vermont Castings LHEC20 User Manual

Lheacnss contour trim kit, Installation instructions

Advertising
background image

LHEACNSS Contour
Trim Kit

Installation Instructions

Kit: KT1B80
for Models LHEC30,
LHEC20, LHER20

These instructions cover the assembly of the KT1B80
Trim Kit and installation to the LHEC30, LHEC20 and
LHER20 fireplace inserts.
Carefully unpack and inspect all components from the
shipping box. Report any missing or damaged parts to
your dealer immediately. Install trim kit after all other
fireplace installation work has been completed, thor-
oughly checked and tested for proper operation, leaks
and installation requirements.

Caution

Always place castings on a flat protected work sur-
face, such as a towel, blanket or carpet.

Tools required: Tape measure
Trim kit parts

Part #

Column Right Assembly

30002073

(1) Column, right

30001978

(1) Boot, right

30001982

(1) Slider Clip, right

30002050

(1) Bracket, On/Off Switch

10005035

(2) 1/4-20 Round Head Screw

1200894

(2) 1/4-20 Wing Screw

1201621

(3) 1/4 Flat Washer

1202474

Column Left Assembly

30002074

(1) Column, left

30001979

(1) Boot, left

30001983

(1) Slider Clip, left

30002049

(1) 1/4-20 Round Head Screw

1200894

(2) 1/4-20 Wing Screw

1201621

(3) 1/4 Flat Washer

1202474

Key

30001981

Upper Mounting Bracket

30002053

Upper Mounting Bracket R

30002054

Hardware Bag:

30001988

(5) 1/4-20 Wing Screw

1201621

(5) 1/4 Flat Washer

1202474

Instruction Sheet

30001987

Assembly

Determine which model fireplace insert you have. This
will be important when adjusting the height and width of
the surround.
1. Place the key (30001981) on your work surface with

the threaded holes facing up.

2. Place the column right assembly (30002073) onto

the key. (Fig. 1)

3. Place the column left assembly (30002074) onto the

key. (Fig. 2)

KT424

column right

assy

9/03

Key

Column Right Assembly

KT424

Fig. 1 Place column right assembly onto key.

KT425

column left

assy

9/03

Key

Column Left

Assembly

KT425

Fig. 2 Place column left assembly onto key.

30001987 8/08 Rev. 4

4. Install the upper mounting bracket. Use the upper

mounting bracket marked R (30002054) for the
LHER20. Use the unmarked upper mounting bracket
(30002053) for LHEC30 and LHEC20. (Fig. 3)

Advertising
This manual is related to the following products: